How far should a toilet be from the wall?

The clearance from a toilet to a back wall is usually 12 inches. Still, it can also be 10 or 14 inches depending on the model.

What are the advantages of ultra-high-efficiency toilets?

High-efficiency toilets are environmentally friendly and give you the best flush while consuming the least amount of water. Since toilets are responsible for up to 30% of water usage in a home, they can significantly help reduce your utility bill and perform as good or better than traditional toilets.

How often should you replace toilet brush?

A toilet brush should be replaced once the bristles have worn out. Keep your brush clean by washing it with a bleach and water solution after each use.

How long should high-efficiency toilets last?

A porcelain toilet can last 50 years under regular use and maintenance.

Are high-efficiency toilets better?

High-efficiency toilets give you the best flush while consuming the least amount of water. They’re environmentally friendly. Since toilets are responsible for up to 30% of water usage in a home, they can significantly help reduce your utility bill.

How often should you replace a toilet brush?

A toilet brush should be replaced once the bristles have worn out. Keep your brush clean by washing it with a bleach and water solution after each use.

What should I look for when buying a new high-efficiency toilet?

Look for toilets that carry the US EPA Watersense labeled. These toilets have a maximum of 4.8 L (1.28 gallons) per flush. They also must flush at a minimum of 350g of waste per flush. Dual-flush toilets are an excellent choice also and often qualify as HETs because their average flush volume meets the requirements.

How much does a good high-efficiency toilet cost?

According to consumer reports, a good high-efficiency toilet costs $200 or less. With the savings on your utility bill, these toilets can pay for themselves in only a couple of years.

What is the U.S. EPA Watersense program?

A WaterSense certified toilet means it meets strict criteria regarding efficiency and performance outlined by the US Environmental Protection Agency. Toilets with this label have a maximum of 4.8 L (1.28 gallons) per flush, and they carry a minimum of 350g of waste per flush.

Do high-efficiency toilets have the same flushing power of standard toilets?

Based on consumer surveys, people are generally satisfied or more than satisfied with their high-efficiency toilet's flushing performance.

What are the disadvantages of ultra-high-efficiency toilets?

Due to the lower volume of water used in high-efficiency toilets, clogging may be more frequent and the need to flush twice. As for pressure-assisted models, they are known to be louder compared to traditional toilets during flushing. Plumbing in older homes may not be angled appropriately or sloped for high-efficiency models, as they operate using gravity and pressure.

In-Depth Product Guide

Ultra High Efficiency Toilet [UHET]

FAQs

·Products

·Related

Ultra High-Efficiency Toilet (UHET) meet the MaP Premium standard for 1.10 gallons per flush, and a minimum of 600 grams of waste per flush. These toilets must also be certified under the U.S. EPA Watersense program.

Federal guidelines in both Canada and the USA specify that new toilets must meet the standard of a maximum of 6L (1.6 gallons) per flush. The US EPA Watersense labeled toilets have a maximum of 4.8 L (1.28 gallons)per flush. They also must flush at minimum 350g of waste per flush. These toilets are also called High Efficiency Toilets (HET). Dual-flush toilets are a good choice too, and often qualify as HETs because their average flush volume meets the requirement.

The Maximum Performace (MaP) Testing Program which was developed in partnership with the Canadian Mortgage and Housing Corportaion (CMHC) and Canadian Water and Wastewater Association (CWWA). The MaP initative tests toilets under realistic conditions and grades them based on overall performance. You can search the grades for different toilets.

An Ultra High Efficiency Toilet is the most advanced flushing machine available, giving you the best flush for the least amount of water. Toilets are the single largest water user in a household, accounting for up to 30% of household water use, so installing a more efficient toilet is your best way to reduce your water consumption.

The ancient city of Harrappa, part of the Indus Valley Civilisation in what is now India, had an early version of flush toilets in many of the houses, over 4,000 years ago!